2018 Chevrolet Silverado 2500HD taillight assemblies
Assemblies stored for the 2018 Chevrolet Silverado 2500HD. This is the marketplace list for that model year. A seller title may mention a side, a pair, or halogen, HID, or LED equipment. That wording is the product title, not a separate fitment check. Bulb sizes are on a different page.
ACANII - For Chevy Silverado 1500 2500HD 3500HD…Check on AmazonDescription
- 100% Brand New; Only Lens and Housing Included; Driver Side Only
AUTOSAVER88 Tail Lights Compatible with 2014-2018 Chevy Silverado…Check on AmazonDescription
- Weatherproof construction: completely sealed with silicone & equipped with one-way vent to prevent moisture from getting trapped inside; the thoroughly tested housing ensures reliable vibration resistance and UV & corrosion protection
- Installation tips: bulbs not included, plug your OE bulbs in the center of tail lamps socket to avoid oblique bulbs melting the housing (NOTE: Professional installation would be highly recommended)
Tail Light Assembly Compatible With 2014-2018 Chevy Silverado…Check on AmazonDescription
- 👍【Replaces Part Number】GM2801261, 23141275.
VIPMOTOZ LED Tail Light Lamp Assembly For 2014-2018…Check on Amazon
VIPMOTOZ OLED Tube Black Housing LED Tail Light…Check on Amazon
ACANII - For Chevy Silverado 1500 2500HD 3500HD…Check on AmazonDescription
- 100% Brand New; Only Lens and Housing Included; Passenger Side Only
GORWARE Tail Light Assembly Compatible with 2014-2018 Chevy…Check on AmazonDescription
- DOT & SAE STAMPED - The OEM grade housing and polycarbonate lens are built to match the original lights but exceed the OE performance.Clear lens with multi-layer protection can resist UV or any harsh weather while ensuring good light transmittance.
AKKON - Fits 2016 2017 2018 2019 Chevy…Check on Amazon
RUXIFEY Single Side 3rd Third Brake Light Seal…Check on AmazonDescription
- SINGLE-SIDED ADHESIVE: Upgrade from double-sided adhesive gasket, our product is much easier for you to remove the lamp housing, and no need to tear off the gaskets when replace burnt out bulb in future. Easy to peel off and make the light stay in place, no weather strip adhesive needed
- NOTICE: 0.2 inch (5 mm) thick foam gasket will leave about 1/8 inch gap outside between the housing edge and vehicle body after installed, but it won't affect waterproof function for protecting the inside part. Make sure you understand and accept this design before ordering